Description
Product Description
Mineral oil separators and fully automatic control systems (units) are mainly used for the purification of fuel and lubricating oil for marine main engines, generators and land-use diesel power stations. The maximum viscosity of the processed oil can reach 380cst/50ºC (3500SRW1/100ºF)
ips to Improve the Efficiency of Centrifugal Separators
The right industrial centrifuge will help improve the efficiency of your separation process. Owing to the availability of wide choices, the selection can be a difficult process. The following tips will make the selection easier for you.
Flow Rate: Although centrifugal separators use centrifugal force to separate, their flow rates may vary. These equipment are rated by pounds per hour. The flow rate is one of the important factors for choosing the size of the separator. If you choose the separator based on the factors such as piping, then the separator may have a much slower rate than expected. If this happens, the filtration may not be complete or properly achieved. To understand the flow rate, perhaps, you can discuss with the manufacturer. Along with this, you need to use the appropriate outlet/inlet size with the piping to ensure the efficient functioning of the centrifugal separator.
User-friendly Design: Centrifugal separators are nowadays available in different designs. However, it is not necessary that all have the same design, and assure user-friendliness. The ideal design is the one that allows a user to conduct startup, cleaning, and maintenance easily. For instance, Lakos centrifugal separators and filtration solutions feature user-friendly designs that allow users to assure easy start-ups and cleaning, whenever required. These designs are proven to filter airborne debris and suspended particles in cooling water towers, chillers, heat exchangers, and evaporative condensers.
Main Specification
| Model | Capacity (L/H) | Inlet pressure | Outlet pressure | Motor power( Kw) | Weight (kg) | Dimension |
| SYN360 | 2000-5000 | 0.05 | 0.1-0.35 | 7.5 | 1200 | 1500*1150*1500 |
| SYN470 | 5000-10000 | 0.05 | 0.1-0.4 | 15 | 1600 | 1800*1200*1800 |
| SYN550 | 10000-20000 | 0.05 | 0.1-04 | 22 | 2300 | 1850*1550*2050 |
| SYN616 | 25000-35000 | 0.1 | 0.3 | 37 | 3300 | 2050*1700*2300 |
* Solid-liquid separation
* Liquid-liquid separation
* Liquid-liquid-solid separation
Structure
Application
Dairy separator: used for milk skimming or milk clarification (removal of solid impurities). The small separator is driven by hand and is used for manual slagging, which is suitable for farmers and herdsmen in pastoral areas; the large separator is used for industrial production and is driven by electricity. The slagging method is manual slagging or ring valve slagging.
Mineral oil separator: It is used to remove water and mechanical impurities from mineral oil such as fuel oil, diesel oil, lubricating oil and transformer oil, and can also separate similar emulsions.
Vegetable oil separator: used for the processing and refining of vegetable oil.
Animal oil separator: used for refining animal fats in meat processing, or used for concentration and separation of fish oil in aquatic processing.
Yeast separator: used to concentrate yeast and discharge slag from nozzles.
Packing,Storage,Handling and Transportation
Certificate
FAQ
Product Warranty:
The guarantee period is 12 months from the date of putting the equipment into operation, but not more than 15 months from the date of delivery.
Free service within warranty:
During a warranty period of exploitation the Seller undertakes to execute warranty service of the equipment, troubleshooting and replacement of out of service spares, except for breakings, bound with incorrect exploitation of the equipment by the Buyer.
Set-up and adjusting of the equipment
After receiving the delivered Goods, the Buyer is obliged to prepare, obtained equipment and applicable lodgment for its installation. Then in written form to inform the Seller on readiness of the equipment for chief- equipment installation, start-up and adjusting.
If necessary,The Seller should send enough technical specialists to help execute the chief – equipment installation, start-up and adjusting equipment on the sight of the Buyer.
Export Packing
The Goods are to be shipped in export packing suitable for the type of goods to be delivered. Packing is to protect the Goods against any damage or corrosion when the Goods are transported by sea or by railway and to provide for possible transshipment of the goods on the way to the place of destination and for a long storage of the goods.
Contact
Vivian Deng
Celll/Whastapp:+86 18040529186
Email:[email protected]
Reviews
There are no reviews yet.